3
© Copyright Advanced Keys Inc. 2011. All Rights Reserved.
•
This product shall be installed by a certified technician therefore a certain level
of competence and knowledge are therefore assumed when reading this guide.
•
This guide is provided as a GENERAL installation instructions and vehicle
subjected to installation maybe different.
•
This product is designed based on vehicle regulatory standard. Please observe
your local public road traffic law and regulations prior to installation.
•
Exercise due-diligence when installing this product. The manufacturer and
distributors of this product will not accept any vehicle damage or personal
injury resulting from the installation of this product. Installation of this product is
acceptance of this statement and releases the manufacturer/distributors of this
product from any direct or indirect liabilities.
•
Once installation is complete, please return this guide along with other
documentations included in this product back to customer for future reference.
The manufacturer/distributors of this product does not guarantee this particular
version will be available at a later date.
PRODUCT SAFETY AND LEGAL DISCLAIMER
WARNING AND SAFETY INFORMATION
•
Carefully read and understand the User Manual, Installation Guide and
Electrical Service Information for the subjected vehicle before begin work.
•
Install in a well-lit, dry, covered area away from the elements and keep at least
one window open all time during installation. Do not leave key inside ignition
switch and /or detection range. Prepare all tools required for the installation.
Special tools maybe necessary depending on vehicle.
•
Verify the vehicle has proper grounding and does not have any outstanding
electrical/functional issue prior to installation.
•
To avoid short circuit, it is recommended to pull-out related fuses before
installation and put them back when installation is complete.
•
Only locate necessary wires related to the installation (most required wiring are
under driver dash/kick panel areas) and connect to the unit according to the
wiring diagram. Use a Multimeter to verify and confirm
before connecting or disconnecting. We strictly prohibit testing or modifying
systems.
•
Begin function tests on the system after verifying and ensuring all wires have
been connected correctly and insulated properly.
PRE-INSTALLATION CONSIDERATIONS
DO NOT power up the module before it is properly grounded.
Should the unit be powered before being grounded, serious
damage to internal components could occur.
CAUTION
