11
© Copyright Advanced Keys Inc. 2011. All Rights Reserved.
Controller operating voltage range: .................................................................................... 10 VDC 16 VDC
Controller Stand by power: .................................................................................................
≤
30mA @ 12 VDC
Avg. controller operating power: ...........................................................................................
≤
80mA@12VDC
Devices operating temperature range: ..................................................................................... -25°C +85°C
Transmitter operating voltage range: ...................................................................................... 2 VDC 4 VDC
Transmitter Stand by power: ................................................................................................. ..
≤
7 µA @ 3 VDC
HF operation frequency and range: ............................................................... 433.92MHz @ 25 - 30 Meters
LF operation frequency and range: .................................................................... 134.2 KHz @ 1.5 - 2 Meters
Smart Key Fob Dimensions: ................................................................................. 65mmL x 44mmW x 6mmH
Base Controller Dimensions: ........................................................................... 115mmL x 90mmW x 30mmH
Installer of this system to is requested to fill out the following information as a proof of installation to
the end-user of this system. For manufacture warranty to take immediate effect please request the
end-user to update the following information at:
http://www.advancedkeys.com/registration.htm
•
Connecting the wire harnesses and power ON the controller, check and confirm system operations
(Refer to User Manual) then verify functions of the vehicle are in working order.
•
Make sure all wiring connection are insulated properly. Place and secure control units to locations
inside trim panels and bundle all lose wiring. Put back all trim panels
•
When mounting the controller unit in the vehicle, consider the location carefully. You should make
sure that you avoid any location where the controller is exposed to moisture, extreme heat or
interfere with moving parts on the vehicle which hampers driving.
•
Explain all functions related to the end-user of this system.
CLOSING UP
REFERENCES INFORMATION
PRODUCT SPECIFICATIONS
PRODUCT REGISTRATION
Company / Installer Name:
Phone Number:
Installer Address:
Date of Installation:
Vehicle Manufacture:
Model:
Year:
Front Antenna Location:
Rear Antenna Location:
Bypass Antenna Location:
Interface/Bypass Module Used:
If YES specify bypass make/model:
All Smart Keys and Bypass Cards Working:
Push-Start Module Installed:
Antenna Mounted on Windshields:
Reviewed Product Operation with End-User:
Additional Comments:
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
