manualshive.com logo in svg

Advanced Instruments OsmoTECH XT, User Manual

Share
Download
Advanced Instruments OsmoTECH XT User Manual Download Page 25

 

Chapter 2 

User interface

26

OsmoTECH XT Single-Sample Micro-Osmometer User Guide

2.5  User interface icons

The following table lists the user interface icons used on OsmoTECH XT screens.

Icon

Description 

Icon

Description

Keyboard input

Select date

USB thumb drive

Clear selection

Define filter

Clear filter

Top of list

End of list

Page up

Page down

Move page left

Move page right

Go to Home screen

Expand/collapse records

Capture the current screen to a USB drive

1. 

Insert a USB drive in the instrument USB port.

2. 

Press and hold the 

 icon in the top-right corner of the screen until you hear a 

camera click

 sound.

The screen image is saved to the USB drive in the 

Advanced Instrument/ScreenShots

 folder as a 

png

 file with the filename 

screenshot_mm-dd-yyyy_hh-mm-ss.png, where mm-dd-yyyy_hh-mm-ss

 indicates the date and time the image was 

captured.

Summary of Contents for OsmoTECH XT


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands