Page
20
of
22
Commands are case sensitive, and must be entered exactly as shown
Command Table
Table 6
COMMAND
DESCRIPTION
RETURNS
SET:CURRENT:CHANNELc,nnnn;
Sets the current in
milliamps
c = 1 - 8 (channel
number)
nnnn= 0-8000 (strobe)
SET:PULSE:WIDTH:CHANNELc,nnnn;
Sets the pulsewidth in
usec
c = 1 - 8 (channel
number)
nnnn = 0 – 4290000000
(us)
INFO: Channel “c” pulse
width set to “nnnn” us
SET:PULSE:DELAY:CHANNELc,nnnn;
Sets the pulse delay in
usec
c = 1 - 8 (channel
number)
nnnn = 0– 4290000000
(us)
INFO: Channel “c” pulse
delay set to “n”
microseconds.
PULSE:CHANNELc;
Software triggers the
channel
c = 1-8
*IDN?;
Gets device information:
firmware, hardware,
etc..
Advanced illumination
“DCS-100: (fw version, hw
version)”
*CHANNEL:INFO?;
Gets device channel
information
SET:IP:ADDRESS,xxx;
Sets static IP address.
Xxx = IP address in
dotted-quad format
(XXX.XXX.XXX.XXX)
INFO: Set IP address to
XXX.XXX.XXX.XXX. Reboot for
it to take effect.
