Advanced Fitness Group Pro 7.2 AT, Owner'S Manual

Page: 12 / 92

12
A Open HARDWARE FOR STEP 3.
B Gently place the CONSOLE (5) on top of the CONSOLE
MASTS (3&4)
. Attach the LEFT SIDE first using 3 BOLTS
(E), 3 SPRING WASHERS (F) , 2 FLAT WASHERS (G)
and 1 ARC WASHER (H) on the bottom.
C The CONSOLE CABLE (6) is tucked into the CONSOLE
MAST (3)
. Using the lead wire carefully pull the CONSOLE
CABLE (6) out of the CONSOLE MAST (3). Detach and
and discard the LEAD WIRE. Connect the CONSOLE
CABLES (6)
and carefully tuck wires in masts to avoid
damage.
D Attach the RIGHT SIDE of the CONSOLE (5) using
3 BOLTS (E), 3 SPRING WASHERS (F)
, 3 FLAT
WASHERS (G) and 1 ARC WASHER (H) on the bottom.
NOTE: Do not tighten bolts completely until
after the console is assembled.
NOTE: Be careful not to pinch any wires while
assembling the console.
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
M8X1.25PX15L 6 E BOLT
8.2X15.4X2.0T 6 F SPRING WASHER
8.4X15.5X1.6T 4
G
FLAT WASHER
ASSEMBLY STEP 3
8.2X18X1.5T 2 ARC WASHER H
E
F G H
E
F
G
H
E
H
G
F
5
4
3
6