Universal system instruction manual
125/10/21 Rev:1.0.1
8
5 INSTALLER’S RESPONSIBILITIES
To ensure proper operation of the product, follow these guidelines:
• Only perform the activities described in these instructions
• Perform all activities in accordance with applicable regulations
• Explain to the user the operation and use of the product
• Explain to the user how to maintain the product
• Report to the user the potential dangers related to the use of the product
6 INTENDED USE OF THE SYSTEM
The system is a system that fi lls the fuel tanks of pellet operated fi replaces, thermo-fi replaces, inserts,
stoves, etc.
It can also transport other granular fuels, obtained from biomass such as pomace, corn, shredded dried
fruit shells, etc.
The system achieves maximum performance when used for EN-plus A1 certifi ed pellets.
The system sucks the pellets directly from rigid containers or bags, using the lance supplied and deposits
it in the stove tank automatically. It stops by itself when the fuel inside the tank prevents the discharge
door from closing. doser (see point 6.2).
Its components can also be installed inside the furnishings that integrate inserts and fi replaces
aesthetically, provided they remain accessible for maintenance purposes.
The system cannot vacuum products with too fi ne (<2mm) or too large (> 10mm) granulometry, or
excessively dusty, damp and liquid (fl our, household dust, sawdust, unshredded shells, liquids, etc.)
It is useful to know that any object which is sucked in could inevitably be released into the chimney tank
with the associated consequences.
All the components, pipes and accessories of the system cannot be installed in extremely humid/ dusty
environments or positions, those exposed to bad weather, where dripping or fl ooding can occur, where
temperatures below 0° c or above 50° c may occur.
6.1 INSTALLATION DIAGRAM
Key:
1 - Fuel suction lance
2 - Suction inlet with backplate for wall fi xing
3 - Fuel suction antistatic pipe Ø 45 mm
4 - Doispenser
5 - Air / dust suction antistatic fl exible hose Ø 45 mm
6 - Motor
7 - Control panel
8 - Air / dust discharge antistatic fl exible hose Ø 45 mm
9 - Burner
