Selfie-Stick Holder
The BIPRO 3 has a useful, broadly adjustable Selfie-Stick
holder
with Neoprene scabbard
. Two velcros on the harness mean that it
can be fastened on left or right side. It is premounted on the left side.
To move it to the other side, first release the Bullet Toggle
on the
bottom of the scabbard from the BIPRO 3. Similarly the two Velcro
pieces that fix Selfie-Stick holder to the back strap and main harness
strap.
Finally lead the single Velcro on the right hand side of the BIPRO 3
through its loop on the back strap
and fasten it to the Selfie-
Stick holder. Then the small sewn-on Velcro strips on the main strap
are fixed on the main strap under the carabiner loops
, and the
Neoprene scabbard Bullet Toggle fastened below on the BIPRO 3.
Your Selfie-Stick or camera can be secured by a line to the blue safe-
ty loop
.
Removing and replacing the protector
The BIPRO 3 is delivered with its Multi-Chamber Foam Protector fitted
in the seat assembly, under the V-Legpads. The protector goes in its
own pocket and can be removed and replaced (for instance for Hike &
Fly – to save weight and/or provide 17.5 ltrs extra storage).
To remove, open the protector compartment zip, under the front of the
seat, and pull the protector carefully out. To replace, push the protec-
tor, closed side first, back into its compartment and close the zip.
14
