Battery Backup Unit
Total Access 900 Series Hardware Installation Guide
26
Copyright © 2010 ADTRAN, Inc.
61210916L1-34G
Unpack and Inspect the BBU
After unpacking the BBU unit, inspect it for damage. If damage is noted, file a claim with the carrier; then
contact ADTRAN Customer Service.
Batteries are retained and prewired in the BBU in a specific pattern. Battery position is maintained by foam
spacers press-fitted against the housing walls. Removing batteries or disconnecting wires compromises
correct reassembly and should not be attempted.
BBU Safety and EMC Notices
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including that which may cause undesired operation.
Removing the BBU covers could allow batteries to fall out.
The BBU (P/N 1175044L1/L2) weighs in excess of 30 pounds. Arrange for assistance
when handling the BBU for mounting.
The BBU should only be used in specified ADTRAN applications.
