background image

 Introduction

Total Access 900 Series Hardware Installation Guide

 14

Copyright © 2010 ADTRAN, Inc.

61210916L1-34G

Up to 24 channels of dual tone multi-frequency (DTMF) detection/generation

Supports 16 ms echo cancellation

Supports up to 24 channels of caller ID

100 ms jitter buffer per channel

User-friendly Web-based graphical user interface (GUI) and a familiar command line interface (CLI)

LEDs for system status information

Total Access 904/908 chassis dimensions: 1.75-inch H x 12.0-inch W x 7.5-inch D

Total Access 912/916/924 chassis dimensions: 1.75-inch H x 17.0-inch W x 8.5-inch D 

AC power: 90 to 120 VAC, 60 Hz

Operating temperature: -40°F (-40°C) to +158°F (+70°C)

Altitude: Up to 10,000 feet

This hardware installation guide describes the Total Access 900 Series units, details basic functionality, 
gives installation instructions, and lists unit specifications. For more information on a specific application, 
refer to the quick start documents provided on your 

AOS Documentation 

CD or online at 

http://kb.adtran.com.

 

Unpack and Inspect the System

Each Total Access 900 Series unit is shipped in its own cardboard shipping carton. Open the carton 
carefully, and avoid deep penetration into the carton with sharp objects. 

After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in 
transit, immediately file a claim with the carrier and contact contact ADTRAN Customer Service (refer to 

Service and Warranty on page 6

).

Contents of ADTRAN Total Access 900 Series Shipments

Shipments of the Total Access 900 Series units include the following items:

Total Access 900 Series base unit 

A detachable power cable with a grounded IEC three-prong power plug

Two brackets and six screws for wall mounting

AOS Documentation 

CD

 

or reference sheet

The Total Access 900 Series

 

system is intended to be installed, maintained, and serviced by 

qualified service personnel only.

For additional documentation, refer to the 

AOS Documentation

 CD shipped with the unit 

and available online at 

http://kb.adtran.com

.

Summary of Contents for Total Access 908





































Reviews: