ADTRAN Octal BRI S/T, User Manual

Page: 30 / 40

Chapter 3. Operation
30 Octal BRI S/T Module User Manual 61200343L1-1
T
EST Read security: 5
Displays test name if the Octal BRI S/T Module is executing a test. Press
Enter
in this field to activate the menu.
S
TATE Displays module status as either O
NLINE
of O
FFLINE
. Even though a module
is physically installed, it must be marked as online for it to be considered an
available resource. This field allows an installed module to be marked as of-
fline, which may be useful in system troubleshooting. If you choose
O
FFLINE
,
the module will not be in alarm condition, but will display O
FFLINE
.
S
TATUS This read-only field provides status information on the Octal BRI S/T Module.
The following messages may display:
O
NLINE
The module is enabled, and is responding to the system controller’s status
polls. This is the normal response of the system.
N
O
R
ESPONSE
The module is enabled, but is not responding to the system controller’s sta-
tus polls. This response indicates either a problem in the system or that the
module is not installed.
E
MPTY
The system controller has not detected the presence of a module in the slot,
nor has a module been manually enabled for this option slot.
O
FFLINE
The module is installed, but has been taken offline by a user. The module is
still responding to controller polls.
O
FFLINE
/N
O
R
ESPONSE
The module is installed, but has been taken offline by a user. The module is
not responding to polls.
R
EV This read-only field displays the hardware revision of the Octal BRI S/T Mod-
ule.
Once a module is installed, S
TATE
must be set to O
NLINE
in order
for the ATLAS 800 Series unit to use the module for any data
bandwidth.