ADTRAN Octal BRI S/T, User Manual

Page: 29 / 40

Chapter 3. Operation
61200343L1-1 Octal BRI S/T Module User Manual 29
Figure 3-2. Menu Tree for Octal BRI S/T Modules Menu
S
LT
Read security: 5
Displays the number of the available slots in the ATLAS 800 Series chassis.
Slot 0 refers to the ATLAS 800 Series unit. This field is read-only.
T
YPE
Write security: 3; Read security: 5
Displays the type of module actually installed in the slot or the type of
module you plan to install in the slot. If an Octal BRI S/T Module is
installed, the Type field automatically defaults to ST-BRI (the Octal BRI S/T
Module). You can use this field to preconfigure a system before actually
installing modules by simply specifying the module that you want to install
in each slot.
M
ENU
Displays additional status and configuration menus for the selected module.
(To access the submenus for this item, use the arrow keys to scroll to the
M
ENU
column for the module you want to edit, and press
Enter
.) For detailed infor-
mation on each submenu item, see the section Modules/Menu on page 3-31.
A
LARM Read security: 5
Displays an alarm condition on the Octal BRI S/T Module. Press
Enter
in
this field to activate the menu.
Info Part Number
ST-BRI Menus Serial Number
Board Revision
Module Alarms Alarm Prt
Alarms
Slt Channel
Type
Menu Channel Usage Prt
Modules Alarm Cha
Test
State
Status Configuration Prt
Rev Port Name
Test Activity
Test Prt
Local Loopback
Remote Loopback
T
YPE
automatically displays the name of an installed module. If
you want to change this field to a different type of module, you
must set
T
YPE
to
E
MPTY
before selecting the other module.