ADTRAN NetVanta 1561i-04, Quick Start Manual

Page: 1 / 9

Quick Start
Overview
This quick start describes how to install, configure, and troubleshoot the NetVanta 1561i-04 industrial L2+ managed GbE switch. This next generation industrial-
grade Ethernet switch has two 10M/100M/1G RJ-45 and two 1G SFP ports that provide powerful L2 and basic L3 features as well as Carrier Ethernet OAM, CFM,
ERPS, and EPS functionality. Figure 1 below shows the front panel layout of the switch.
■ “Installing the NetVanta 1561i-04 Switch” on page 2
■ “Supplying Power to the NetVanta 1561i-04 Switch” on page 4
■ “Connecting the DI/DO Relay Wires to the Switch” on page 4
■ “Installing SFP Modules” on page 5
■ “Connecting to the Switch” on page 5
■ “Understanding the Status LEDs” on page 7
■ “Resetting the Switch” on page 8
■ “Troubleshooting the Switch” on page 8
■ “Product Specifications” on page 8
Figure 1. NetVanta 1561i-04 Front Panel Layout
WARNING!
f
Read all warning, cautions, notes and installation instructions before installing or servicing this equipments.
ON
12
10/100/1000
RJ-45 Ports
Port Status
LEDs
Port Status
LEDs
100/1000
SFP Ports
Ground Screw
System LED
Power 1 LED
Ring Master LED
Rapid Chain LED
Power 2 LED
Alarm LED
12/24/48 VDC
Dual Input
Digital Input
Voltage
Digital Output
Relay
CONSOLE
Port
DIP Switch
(Ring Settings)
Reset
Button
f
WARNING!
f
CAUTION!
g
NOTE
WARNING indicates a hazard which, if not
avoided, could result in death, injury or
serious property damage.
CAUTION indicates a hazard which, if not
avoided, could result in service interruption,
damage to the equipment, or minor property
damage.
NOTES inform the user of additional, but
important, information or features.
ADTRAN
NetVanta 1561i-04
Industrial L2+ Managed GbE Switch
February 2021
617111561F1-13A
P/N: 17111561F1