ADTRAN NetVanta 1561i-04 Quick Start Manual Download Page 9

Documentation for ADTRAN Network Solutions products is 

available for viewing and download directly from the ADTRAN 

Support Community website. 

Go to: 

https://supportcommunity.adtran.com

ADTRAN offers training courses on our products, including 

customized training and courses taught at our facilities or at 

customer sites.

For inquiries, go to:

 

http://adtran.com/training

Access additional safety information and product documentation using the QR 

code or website.

https://supportcommunity.adtran.com

Warranty:

ADTRAN will replace or repair this product within the warranty period if it does not 

meet its published specifications or fails while in service. Warranty information can be 

found online at 

www.adtran.com/warranty

.

Trademarks:

 Brand names and product names included in this document are trademarks, 

registered trademarks, or trade names of their respective holders.

Copyright © 2020 ADTRAN, Inc. All Rights Reserved.

C A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY

HANDLING PRECAUTIONS REQUIRED

ADTRAN CUSTOMER CARE:

From within the U.S.     1.888.423.8726

 

From outside the U.S. +1 256.963.8716

PRICING AND AVAILABILITY 1.800.827.0807

*617111561F1-13A*

Compliance

■ NRTL Listed to the applicable UL/CSA Standards. 
■ This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

■ 1. This device may not cause harmful interference.
■ 2. This device must accept any interference received, including interference that may cause undesired operation.

■ Changes or modifications not expressly approved by ADTRAN could void the user's authority to operate this equipment.
■ This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, 

and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the 

interference at his own expense.

CAUTION!

f

If sufficient ventilation is not provided, the unit could overheat. Do not mount the unit on a heated surface or close to a heat source.

CAUTION!

f

Do not locate the product in direct sunlight or next to any thermal obstructions or source of moisture.

NOTE

g

Changes or modifications not expressly approved by ADTRAN will void the warranty.

WARNING!

f

WARNING!

Surfaces may be hot to the touch.

CAUTION!

f

Connect the DC power inputs to a reliably grounded DC power source that is electrically isolated from the AC source. This product is intended to be 

supplied by a UL60950-1 or UL62368-1 listed power supply rated 12-48 VDC, minimum 1.0 A, and suitably rated for the ambient conditions (up to 

167

°

F or 75

°

C). A readily accessible disconnect device that is suitably approved and rated, must be incorporated in the field wiring. Ensure that the 

power is removed from each power feed before installing or servicing this equipment.

NOTE

g

This equipment contains no parts that can be serviced by the user.

Summary of Contents for NetVanta 1561i-04










Reviews: