Introduction
NetVanta 1000/1000R Series Hardware Installation Guide
18
Copyright © 2006 ADTRAN, Inc.
61200500L1-34J
•
1200864L1
Analog Modem DIM
•
1200865L1
ISDN BRI DIM
•
1200875L1
ISDN S/T DIM
•
1200886L1
Serial DIM
NetVanta 1224STR (DC)
The NetVanta 1224STR (DC version) is a managed switch containing a multi-service router, housed in a
1U-high rack-mountable metal enclosure that includes a DC power supply. The front panel of the
NetVanta 1224STR DC contains 24 10/100BaseT Ethernet ports, a single Gigabit Ethernet interface,
accessed via a fixed RJ-45 connector or an SFP slot for fiber connectivity. In addition, it contains a single
NIM slot on the rear panel that supports the following modules:
•
1200861L1
56K/64K NIM
•
1202862L1
T1/FT1 NIM
•
1200862L2#NEBS T1/FT1 NEBS NIM
•
1202863L1
T1/FT1 + DSX-1 NIM
•
1200872L1
Dual T1 NIM
•
1200868E1/L1
E1/FE1 NIM
•
1200878E1/L1
E1/FE1 + G.703 Drop NIM
•
1200866E1/L1
Serial Interface Module
•
1200867L1
SHDSL NIM
•
1200869E1/L1
ADSL NIM, Annex A
•
1200889E1/L1
ADSL NIM, Annex B
•
1200864L1
Analog Modem DIM
•
1200865L1
ISDN BRI DIM
•
1200875L1
ISDN S/T DIM
•
1200886L1
Serial DIM
NetVanta 1524ST
The NetVanta 1524ST is a Layer 2 managed switch housed in a 1U-high rack-mountable metal enclosure
that includes a universal AC power supply. The NetVanta 1524ST has twenty-four 10/100/1000BaseT
Ethernet ports. The 10/100/1000BaseT ports are accessed via standard RJ-45 connectors, and four of these
twenty-four ports can be used in copper or fiber mode. Four industry-standard SFP slots are available for
fiber connectivity. The NetVanta 1524ST supports industry-standard SFP modules. The switch is managed
through an EIA-232
CONSOLE
port (DB-9).
Power Over Ethernet
The NetVanta 1000 and 1000R Series Power over Ethernet (PWR) devices provide the same basic
functionality as the NetVanta 1000 Series products. Power over Ethernet provides the ability to detect
attached powered devices (PD) and deliver 48 VDC to the PD via existing CAT5 cabling. The PWR
devices are fully compliant with the IEEE 802.3af power over Ethernet standard. By default, the PWR
switches discover and provide power to IEEE-compliant PDs.
