ADTRAN IMUX-56, User Manual

Page: 15 / 30

61200262L1-1A IMUX-56/64 Module User Manual 2-1
Chapter 2
Installation
UNPACK AND INSPECT
Carefully inspect the IMUX-56/64 Module for shipping damages. If damage
is suspected, file a claim immediately with the carrier and then contact
ADTRAN Technical Support. If possible, keep the original shipping
container for use in returning the IMUX-56/64 Module for repair or for
verification of shipping damage.
Contents of ADTRAN Shipment
The following items are included in the ADTRAN shipment:
• IMUX-56/64 Module
• IMUX-56/64 Module User Manual (insert into main ATLAS User Manual)
INSTALLING THE IMUX-56/64 MODULE
The installation procedure is described below, and Figure 2-1 shows the
proper placement of the option module.
Instructions for Installing the IMUX-56/64 Module
Step Action
1
Remove the cover plate (corresponding to the slot into which the
IMUX-56/64 Module will be installed) from the ATLAS chassis
rear panel.
2
Slide the IMUX-56/64 Module into the ATLAS chassis until the
module is positioned firmly against the front of the ATLAS unit.
3
Fasten the thumbscrews at both edges of the option module.
4
Complete installation of remaining modules and Base Unit as
specified in the
Installation chapter of the ATLAS User Manual .