ADTRAN IMUX-56, User Manual

Page: 21 / 30

Chapter 3. Operation
61200262L1-1A IMUX-56/64 Module User Manual 3-5
State
Read security: 5
Displays whether the module is online or offline. Even though a module is
physically installed, it must be marked Online for it to be considered an
available resource. Marking an installed module Offline may be useful in
system troubleshooting. If you choose Offline, the module will not be in
alarm condition, but will display Offline.
Status
Read security: 5
Displays status information on the IMUX-56/64 Module. Table 3-3
describes status messages that may appear and their meanings.
Rev
Read security: 5
(Hardware Revision) Displays the hardware revision of the IMUX-56/64
Module.
Only if State reads Online, can the ATLAS use an installed
module for any data bandwidth.
Table 3-3. Status Messages
Message Meaning Comments
Online The module is enabled and is responding to the
system controller’s status polls. This is the normal response of
the system.
No Response
The module is enabled but is not responding to the
system controller’s status polls. This response indicates either a
problem in the system or the
module is not installed.
Empty The system controller has not detected the
presence of a module in the option slot, nor has a
module been manually enabled for this option slot.
Offline
The module is installed but has been taken Offline
by a user. The module is still responding to
controller polls.
Offline /
No Response The module is installed but has been taken Offline
by a user. The module is not responding to polls. This response indicates either a
problem in the system or the
module is not installed.
Not Ready
The module is installed and performing startup
initialization. The initialization of the IMUX-
56/64 should take less than 10
seconds.