ADTRAN Express 5210, User Manual

Page: 32 / 203

Chapter 2. Installation
2-2 Express 5210 User Manual 61200208L1-1
ADTRAN shipments of DBU cards include the following:
• DBU card
• An 8-position modular to 8-position modular cable for the
4-wire SW56 and ISDN DBU cards, or
• An 8-position modular to 4-position modular cable for the V.34
DBU card.
ADTRAN shipments of voice cards include the following:
• Dual voice card
• Two 8-position modular to 8-position modular cables (for the
E&M and FXO cards), or
• Two 4-position modular to 4-position modular cables (for the
FXS card)
Customer Provides
The customer provides an interface cable for each port used. Each
cable should be either an EIA-232 with a standard 25-pin male
D-type connector or a V.35 cable. V.35 requires an ADTRAN
adapter cable (part numbers: male 1200193L1; female 1200194L1).
Power Up
Each Express 5210 unit is provided with a captive eight-foot power
cord, terminated by a three-prong plug which connects to a
grounded 115 VAC power receptacle.
REAR PANEL
The Express 5210 is equipped with a DB-25 connector labeled
DTE
.
Connections to the dedicated circuit and VT 100 interface are
provided through the 8-pin telco jacks labeled
TELCO
and
Power to the Express 5210 must be provided from a grounded 115 VAC,
60 Hz receptacle.