ADTRAN Express 5210, User Manual

Page: 142 / 203

Chapter 13. Statistics
13-6 Express 5210 User Manual 61200208L1-1
Max Rx Thru
Avg Rx Thru Maximum/average throughput sample in the receive direction for the given interval.
This is displayed in kbps.
Max Rx Util%
Avg Rx Util% Maximum/average utilization sample in the receive direction for the given interval.
Utilization is displayed as a percentage of port bandwidth.
Tx Frames Total frames transmitted.
Tx Bytes Total bytes transmitted.
Max Tx Thru
Avg Tx Thru Maximum/average throughput sample in the transmit direction for the given interval.
This is displayed in kbps.
Max Tx Util%
Avg Tx Util% Maximum/average utilization sample in the transmit direction for the given interval.
Utilization is displayed as a percentage of port bandwidth.
Time in DBU The amount of time (in seconds) that the DLCI has been in dial backup mode.
PVC IA Time Time in seconds that the PVC is in the inactive state.
Rx FECN
Tx FECN Number of frames received/transmitted on this port over the specified DLCI with the
FECN bit of the frame relay header enabled.
Rx BECN
Tx BECN Number of frames received/transmitted on this port over the specified DLCI with the
BECN bit of the frame relay header enabled.
Rx DE
Tx DE Number of frames received/transmitted on this port over the specified DLCI with the
discard eligibility (DE) bit of the frame relay header enabled.
Rx CR
Tx CR Number of frames received/transmitted on this port over the specified DLCI with the
CR bit of the frame relay header enabled.
Lost Frames Number of frames lost across the PVC. This field is applicable only if the S
EQUENCE
N
UMBER
C
HECKING
option is E
NABLED
. See the section Seq Num Checking (SEQ #)
on page 9-8.
Rmt Lost Frames Number of lost frames reported by the remote Express 5210. This field is applicable
only if the S
EQUENCE
N
UMBER
C
HECKING
option is E
NABLED
. See the section
Seq
Num Checking (SEQ #) on page 9-8.
Rx Burst Seconds
Tx Burst Seconds Amount of time (in seconds) that throughput in the receive/transmit direction is greater
than CIR.
Min Rx Frame
Max Rx Frame
Avg Rx Frame Size of smallest/largest/average frame received across the DLCI.
Min Tx Frame
Max Tx Frame
Avg Tx Frame Size of smallest/largest/average frame transmitted across the DLCI.
Min Frame Delay
Max Frame Delay
Avg Frame Delay Minimum/maximum/average round trip delay of the DLCI. This field is applicable only
if the network port's PVC D
ELAY
M
EASUREMENT
option is E
NABLED
. See the section
Delay Measurement (PVC DELAY)
on page 9-8.
PVC State
Change Number of changes in the PVC state.
Statistics Field Description