ADTRAN Express 5210, User Manual

Page: 92 / 203

Chapter 7. DTE Port Configuration
7-16 Express 5210 User Manual 61200208L1-1
PPP Synchronous Protocol (PPP SYNC)
PPP S
YNCHRONOUS
protocol provides a PPP device access to the
frame relay network and also routes IP traffic from the network to
the PPP device. See Figure 7-8 for the
PPP S
YNCHRONOUS
menu
tree.
Routing
Routing tables are formed through a combination of RIP and static
route entries. If RIP is used, routing tables are generated
dynamically. With static routing, the user is able to force
relationships. Static routing requires additional configuration (see
the chapter IP Setup on page 12-1 for more information).
A port set for PPP S
YNCHRONOUS
protocol routes and supports IP
traffic only.
Figure 7-8. PPP Synchronous Protocol Menu Tree
PROTOCOL PPP SYNCHRONOUS
PHYSICAL LAYER OPTIONS INTERFACE TYPE EIA 232
V.35
BIT RATE (selections depend on
N
ETWORK speed setting)
TD CLOCK SOURCE INTERNAL
EXTERNAL
TRANSMIT IDLE CODE
FLAGS
ONES
HARDWARE FLOW CONTROL OFF
ON
PROTOCOL OPTIONS N/A
ADDRESS TABLE N/A