ADTRAN Express 5210, User Manual

Page: 106 / 203

Chapter 9. Network Port Configuration
9-2 Express 5210 User Manual 61200208L1-1
Figure 9-1. Network Port Configuration Menu Tree
When configuring from a terminal, the screen in Figure 9-2 appears
when
N
ETWORK
P
ORT
is selected.
EIA-232
V.35
INTERFACE TYPE (DCE interface card only) NETWORK
PHYSICAL LAYER OPTIONS
See the section Physical Layer Options (PHYS LYR
OPTS) on page 9-4 for these selections.
FRAME RELAY OPTIONS SIGNAL TYPE NONE
T391 LMI
N391 ANSI T1.617-D
N392 ITU-T Q.933-A
N393
REMOTE FECN
NOTIFICATION DO NOT NOTIFY
CONFIG NETWORK PORT NOTIFY REMOTE ON FECN
LLC2 OPTIONS
LLC2 N2 RETRY
COUNTERS
PRIORITY QUEUE RATIO LLC2 k WINDOW SIZE
LLC2 ACK TIMEOUT
LLC2 POLL TIMEOUT
LLC2 BUSY TIMEOUT
DLCI LLC2 REJECT TIMEOUT
DBU DLCI LLC2 KEEP-ALIVE TIMEOUT
PVC OPTIONS CIR (KBPS)
SEQ NUM CHECKING
DELAY MEASUREMENT DISABLED
IP INTERFACE ENABLED
In this chapter, the terminal selections are listed first followed by the front
panel selections (if the names differ).