ADTRAN DSU IV ESP, User Manual

Page: 96 / 194

Chapter 10. Management Functions
10-4 DSU IV ESP User Manual 61204011L1-1
SNMP Options
The following options must be configured when SNMP
management is used.
Get Community
For SNMP operation, view and edit the
G
ET
C
OMMUNITY
string. The
DSU IV ESP uses this string to validate SNMP Get (read) requests.
The default value is public. If using front panel entry, see the
section Entering Letters Using The Front Panel on page 10-6 for more
information.
Set Community
For SNMP operation, view and edit the S
ET
C
OMMUNITY
string. The
DSU IV ESP uses this string to validate SNMP Set (write) requests.
The default value is private. If using front panel entry, see the
section Entering Letters Using The Front Panel on page 10-6 for more
information.
Trap Community
For SNMP operation, view and edit the T
RAP
C
OMMUNITY
string.
The DSU IV ESP sends this string in SNMP trap messages to the
network manager. The default value is dsuiv. If using front panel
entry, see the section Entering Letters Using The Front Panel on page
10-6 for more information.
SNMP Traps
Specify which traps the DSU IV ESP will send to the network
manager. When enabled, the DSU IV ESP sends SNMP traps to
network managers for alarm conditions. The options are
D
ISABLE
,
G
ENERIC
O
NLY
, and E
NABLE
A
LL
. The G
ENERIC
O
NLY
option enables
the Generic Standard traps specified in the SNMP standard, RFC
1157. The
A
LL
option sends both Generic Standard traps and the
enterprise-specific traps specified in the ADTRAN DSU IV ESP
MIB.
Trap IP Address
Enter up to five IP addresses of the SNMP managers to which the
DSU IV ESP should send traps.