ADTRAN DSU IV ESP, User Manual

Page: 82 / 194

Chapter 9. Configuring Dial Options
9-2 DSU IV ESP User Manual 61204011L1-1
Figure 9-1. Dial Options Configuration Menu Tree
1= Phone Number Stored number to edit (1-10): NNNNNNN
1=Network Opt.
2=DTE Options
2= SW56 Auto Ans 1= Disabled
3=Test Options 2= Enabled
Config 4=Dial Options 1= Disabled
5=Management 1= Automatic DBU 2= Enabled 1= DBU with #1
6=Utilities 3= DBU Options 2= Number to Dial 2= DBU with #2
1= Disabled
3= Origin/Answer 1= DBU Originate 1= When OOS 2= Enabled
2= DBU Answer
4= DBU Criteria 2= No RX Signal 1= Disabled
2= Enabled
5= Auto Restore Restore Timer
0=Off: 0 Min
3= No Seal Cur. 1= Disabled
2= Enabled
6= Redial Counter Enter Redial Count:0
4= When all 1s/0s 1=Disabled
7= Fail Timer Auto DBU Fail Time: 2=Enabled
0X10 Sec
5= Answer Always 1= Disabled
8= Wait to Redial Wait to Redial 2= Enabled
Time: 0 Sec
6= Weekend Lockout 1= Disabled
S4W DBU Option Card 2= Enabled
Network Type AT&T/MCI/Other
US Sprint
7= Daily Lockout 1= Disabled
2= Enabled
V.34 DBU Option Card 8= Lockout Start 1= Lockout start
Error Control 1= Buffered 2= HR (0-23):xx
2= Direct
3= Reliable MNP
9= Lockout End 1= Lockout end
4= Auto MNP 2= HR (0-23):xx
5= Reliable V.42
6= Rel. V.42/MNP
7= Auto V.42/MNP
Flow Control 1= Disabled
2= XOn/XOff
3= CIS only
4= RTS/CTS
5= Uni. XOn/XOff
Compression 1= Disabled
2= Enabled
ISDN DBU Option Card
Switch Type 1= AT&T 5ESS 1= Enable/Disable 1= Enable
2= NT DMS-100 2= Disable
3= National ISDN
4= DBU Passcode 2= Enter Code XXXX