Enable Mode Command Set
61200630L1-35C
21
show interfaces ima
Purpose
Use the show interfaces ima command to display configuration parameters, status
information, and performance statistics for the IMA interface.
Variations of this command include the following:
• show interfaces ima config
• show interfaces ima performance 15-minute group
• show interfaces ima performance 24-hour group
• show interfaces ima performance 15-minute link <1 to 8>
• show interfaces ima performance 24-hour link <1 to 8>
• show interfaces ima status group
• show interfaces ima status link <1 to 8>
Syntax Description
displays the syntax descriptions for the show interfaces ima command.
Default Values
The show interfaces ima command has no default values.
Command Modes
The Enable Mode Command prompt is required for this command.
Functional Notes
The following is a sample output of each show interfaces ima sub-command:
config
• Frame Length
• IMA version
• TX group id
Table 10. Syntax Description for show interfaces ima
Syntax
Description
config
This variable displays IMA group configuration.
performance
IMA group and link performance statistics in 15-minute and 24-hour intervals
are displayed. There is a current and previous bucket displayed for each
interval type.
status
This variable displays IMA group and link status information.
