ADTRAN 1200410L2, User Manual

Page: 41 / 80

61200410L2-1A ESU LT User Manual 41
Chapter 5
Configuration Menu
CONFIG
The
C
ONFIGURATION
menu is used to set the ESU LT operational
configuration, including all of the network interface parameters and
the allocation of the time slots and the port parameters. See Figure
5-1.
Figure 5-1. Configuration Menu
1) FRAMING
1) NETWORK (NI) 2) LINE CODE
3) CRC-4
4) NFAS WORD
5) RFA GEN
6) TIMING MODE
1) POSITION
1) CONTROL PORT 2) MODEM INIT
3) DATA RATE 1) TRAPS
2) UNIT 2) ALARMS 2) OUTPUT
3) TEL NUM
2) CONFIG 3) MANAGEMENT 1) NONE
2) INBAND
1) INTERFACE 3) TS0
2) TS0 RATE
3) MAPPING
4) DTE TX CLOCK
5) START TS0
3) PORT 6) # OF TS0s
7) DATA
8) CTS
9) DCD
10) DSR
11) INBAND