ADTRAN 1200410L2, User Manual

Page: 32 / 80

Chapter 3. Operation
32 ESU LT User Manual 61200410L2-1A
Menu Operation
To choose menu items, place the cursor on the appropriate menu
item by pressing the number corresponding to the menu item or
highlighting the menu item with the up and down arrow (also see
Table 3-1 on page 29). All fields followed by a colon (:) are
editable. Menu fields followed by an equal sign (=) cannot be
edited; these fields are used for display only. As an example, Table
3-2 describes how to activate the
N
ETWORK
menus from the
C
ONFIG
menu.
Figure 3-2. Cursor on Menu Item
Figure 3-3. Submenu Fields
Table 3-2. Activating the Network Menus from the Config Menu
Step Action
1 Use the up and down arrows to place the cursor on the appropriate
menu item (in this example CONFIG ). See Figure 3-2 on page 32.
2 Place the cursor on the
number 2
and press
Enter
.
The unit responds by displaying the first two available submenu
fields. The cursor is on the first field. If there are more than two menu
fields, a
down arrow is visible on the lower right corner. See Figure 3-
3 on page 32.