Chapter 2. Installation
4
Quad Nx 56/64 Module User Manual
61200.184L1-1
INSTALLING THE QUAD NX 56/64 MODULE
Figure 2-1
is representative of the action required for proper placement of
the Quad Nx 56/64 Module. Perform the following steps to install the
option module:
1. Remove the cover plate (corresponding to the slot in which the Quad
Nx 56/64 Module will be installed) from the ATLAS 800 chassis rear
panel.
2. Slide the Quad Nx 56/64 Module into the ATLAS 800 chassis until the
module is positioned firmly against the front of the ATLAS unit.
3. Fasten the thumbscrews at both edges of the option module.
4. Connect the cables to the associated device (s).
5. Complete installation of remaining modules and Base Unit as specified
in the
Installation
chapter of the
ATLAS 800 User Manual
.
Figure 2-1
Installing the Quad Nx 56/64 Module
