ADTRAN 1200063L1, Manual

Page: 75 / 137

61200063L1-20 DSU III TDM User Manual 6-1
Chapter 6
Configuring Network Options
NETWORK OPTIONS
The N
ETWORK
O
PTIONS
configuration parameters control the loop opera-
tion of the DSU III TDM.
Once a parameter is set, C
OMMAND
A
CCEPTED
is displayed briefly before
returning to the active menu.
Loop Rate
The L
OOP
R
ATE
option sets the loop operating speed. The unit should be
set to the rate required by the DDS.
The DSU III TDM supports loop rates of 56 and 64 kbps (shown in Figure
6-1). The default factory setting is 56 kbps.
Figure 6-1. Setting Loop Rate Options
1=LOOP RATE 1=56K
1=NETWORK OPT. 2=CLOCK SOURCE 2=64K 1=SCRAMBLER OFF
3=REMOTE CONFIG. 2=SCRAMBLER ON
1=LOCAL
2=DTE OPTIONS
3=CONFIG 3=TEST OPTIONS
2=REMOTE 4=DIAL OPTIONS
5=MANUAL COMMAND