Adtech ADT-HC8200, User Manual, Page: 59 / 97

XT20100820 HC8200 Flame Cutting Machine User’s Manual
3-35
8. Y axis drive direction: you can select forward or backward according to your requirement.
9. Limit and alarm: select Yes if you need to use limit and alarm, otherwise select No.
I/O
Figure 3.2.4.3.2 I/O Configuration
The I/O configuration allows you to customize the input and output ports of the system, and they must be
matching with the external interfaces of the cutter. The serial No. here is not line No. (i.e. socket No.) but IN and
OUT No. Refer to definition of the ports for the relationships between line No. and OUT/IN No. Currently the
system supports 28 input ports and 29 output ports. The system will prompt at the bottom right of the interface if
port setting exceeds the limit. After modification, press F8 to save the setting and apply the modified ports. This
function is provided to convenience future maintenance. If one of the ports is not functioning, you can simply
change the port without having to return the entire machine for repairing.
Note: do not modify the port if it functions well in order not to disorder the cutting machine if you don’t
understand the cutting machine very well. Of course, if you know it very well, you can customize the port
according to your requirements.