Adtech ADT-HC8200, User Manual, Page: 52 / 97

Chapter 3 Function and Operation
3-28
3.2.4.1 F1
Common
Figure 3.2.4.1.1 Common parameters
Plate size
Size of the plate to be processed, in order to inspect whether the plate is on the workbench.
Marking Compersation
The distance between sprayer and main cutting torch while powder spray marking.
Idle stroke speed
The speed during idle running, with the value greater than 0.
Kerf width
Width of kerf, with the value greater than 0.
Cutt mode
The system provides the following cutting modes: preview, oxygen gas, plasma, spraying and plasma mark.
These options can be added or removed in encryption setting.
Note: all craftsmanship parameters are saved separately according to cutting mode to avoid mixing up. The
current parameters are only under the current cutting mode but will not influence those under other cutting modes
(expect system parameters).
Display idle path
Whether or not to display idle path of the Shape.
Save inclination adjusting value