Modulator Lineup
This feature enables the operator to quickly view and/or configure select modulator RF
output parameters. The parameters available in this menu are;
1. Carrier Mode:
[ PURE_CARRIER or ON ]
2. Transmit:
[ ENABLED or DISABLED]
3. Output Power:
[ in 0.5dB increments ]
4. Output Frequency: [ in 1.0MHz increments ]
To access the
menu, press the F1 and F2 keys simultaneously. The front panel will briefly
flash “MODULATOR LINEUP” then display the menu.
Note:
To use this feature, the front panel display must be illuminated. If the display is
dim, press ANY front panel button to illuminate it.
Note:
If the unit has been previously configured by the operator and powered OFF and ON,
then the display will read the last valid configuration, however, Tx will read
DISABLED.
To select the desired
Carrier Mode
, press the front panel “SELECT” button.
To set
Transmit
to ENABLED or DISABLED, press the front panel “ENTER” button.
To set the desired output
Power Level
, press and hold the front panel
↑ or ↓
button.
To set the desired output
Modulator Frequency
, press and hold the front panel
← or →
button.
Note:
If the
Modulator Frequency
is reconfigured when
Transmit
= ENABLED, then
Transmit
will be automatically set to DISABLED.
