Adtec EN-91 User Manual Download Page 57 | Manualshive

Page: 57 / 66

background image

- Dolby E 5.1/2.0/1.0, AC-3, LPCM, Linear Acoustic

Audio Signal Generation

- MPEG 1 Layer 2 audio tones user selectable frequency per pair from 440 hz to 2.5Khz. Group L/R
mute or Pair L/R mute. No audio inputs are required to generate audio tones.

Transport Table Generation

MPEG Program Specific Information (PSI) table compliance:

PAT / CAT / PMT

DVB Service Information (SI) static table compliance: (Dynamic Option)

SDT / NIT / EIT / TDT/TOT
ATSC A65B (PSIP) static table compliance (Dynamic Option)
MGT (TVCT) – Terrestrial / STT / RRT / EIT 0-3

Ancillary and Waveform Data

(V/H) ANC and WSS Video User Data
- Waveform (Composite or SD SDI):

Closed Captions per CEA-608-C (2005), (Carriage per SCTE DVS-157, ATSC-A_72).

Wide Screen Signaling (WSS) per ETSI EN300_294 V1.4.1 (2003-04), (Carriage per ATSC-A_72 AFD).
Teletext per ITU-R BT.653 (Carriage per ETSI EN 300_472 V1.2.1 (2003-01)
AMOL
- (V/H) ANC per SMPTE 291M (Native via SD/HD SDI):

Closed Captions per CEA-708 (Carriage per ATSC-A_72).

Teletext/Subtitles per OP47 (Carriage per ETSI EN 300_472 V1.3.1 (2003-01).
VITC per SMPTE 12M-2-2008 (Carriage per SMPTE 2038-2008, also insertd in GOP headers).
AFD/Bar Data/Pan Scan per CEA-CEB16 (2006) per SMPTE 2016 (Carriage per ATSC-A_72).

Waveform Bridging and Conversion of Video User Data
- CEA 608 to CEA 708 bridging
- Caption Carriage:

CEA-608 via Composite merged with SD or HD Video via SDI (Similar frame rates required)

- Teletext Carriage:

Waveform Teletext via Composite merged with SD or HD Video via SDI

- WSS Carriage:

Waveform WSS via Composite merged with SD Video via SDI

Encryption

DVB Common Scrambling Algorithm Basic Interoperable Scrambling System (BISS). Mode 0 Clear
(Free To Air - FTA), Mode 1, and Mode E.

System and Host

Alarms
- Front Panel LED, Web UI, SNMP, GPIO

Physical and Operational

Physical / Environmental

1 RU chassis ( 19” X 18” X 1.65” / 482mm x 457mm x 44mm )
Weight – 9-14lbs. Dependent on RF Option

«
...
55
56
57
58
59
...
»

Summary of Contents for EN-91



































































Reviews:

No comments

Related manuals for EN-91

Brand: Xantrex Pages: 76

Brand: ZCS Pages: 74

Brand: Olimpia splendid Pages: 47

Brand: TANDBERG Pages: 384

E5714 DSNG Voyager

Brand: TANDBERG Pages: 314

Brand: V-TAC Pages: 4

Brand: Reach Pages: 13

Brand: Magtek Pages: 54

EXT-DVI-2-HDSDISSL

Brand: Gefen Pages: 21

Brand: Delta Pages: 1

Brand: mundoclima Pages: 60

Brand: Badger Power Electronics Pages: 29

Brand: Vicruns Pages: 212

60 WATT SOLAR 12 VOLT POWER GENERATOR KIT

Brand: Sunforce Pages: 14

Brand: MDS Power Pages: 16

Brand: NAIM Pages: 43

Brand: Quickfilter Pages: 9

Brand: Kübler Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands