Transport Outputs:
All outputs operate concurrently.
ASI
Connector: BNC x2
ISO13818-1 MPEG 2 Transport Stream per EN 50083-9:1997 (188 byte only).
Physical interface 72 Mbit/s.
Transport Over IP (TSoIP)
Connector: RJ45 x1
ISO13818-1 MPEG 2 Transport Stream per EN 50083-9:1997 (188 byte only).
UDP or RTP encapsulated routes
with
SMPTE 2022 (COP3 FEC). MPTS or SPTS user definable.
QAM (optional)
Connector: F-style RF female jack
Frequency: 54 to 862 Mhz
QAM Modulation Schemes supported:
Annex A (8 Mhz)
Annex B (6 Mhz)
QAM constellations:
Annex A: 64, 256
Annex B: 64, 256
Main Power: 45dBmV to 56dBmV, in 1 dBmV increments
MER: 38.0 dB minimum (average).
IF Output Connector: F-style RF female/jack Frequency: Selectable 44 MHz (USA) and
36.125MHz (Europe)
Physical:
Operating Temp.: 0 to +50 °C/+32 to +122°F
Power Supply (nominal): 100 - 240 VAC
Power Consumption (nominal): 33.6 W (120V @ 280mA)
Weight: 6 lbs
Measurements: (H X W X D) 1.73” X 19” X 13.32”
Managment:
Front Panel Controls
Browser-based Web Interface
SNMP
Specifications Disclaimer:
Specifications subject to change without written notice. Copyright
2010 Adtec Digital. EN-20 is a trademark of Adtec Digital. Other product and company names
may be trademarks or registered trademarks of their respective companies. This information
may not, in whole or in part, be copied, photocopied, reproduced and translated, or reduced to
any electronic medium or machine-readable form without prior consent in writing from Adtec
Digital.
Summary of Contents for EN-20
Page 35: ......
