Adtec Edje 4000, User Manual

Page: 8 / 51

Chapter 3 - Operations
Electrical Device Compliance Notices
Safety Warnings and Cautions
For your safety and the proper operation of the device:
This unit must be installed and serviced by suitably qualified personnel only.
•
Disconnect all power before servicing the unit. •
Do not expose this device to rain or other moisture. Clean only with a dry cloth.
•
If not installed in an equipment rack, install the product securely on a stable surface.
•
Install the product in a protected location where no on can step or trip over the supply cord, and where the supply
cord will not be damaged.
•
If a system is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack
environment may be greater than the room ambient temperature. •
Consideration should be given to installing the unit in an environment compatible with the maximum recommended
ambient temperature of 50 degrees Celcius (122 degrees Fahrenheit).
•
Install the unit in a rack so that the amount of airflow required for safe operation is not compromised.
The recommended clearance on the top and sides of the unit is at least ½ “ (one half inch/one centimeter). ♦
•
Mounting of the unit in a rack should be such that no hazardous condition is achieved due to uneven mechanical
loading.
•
Use only a grounded electrical outlet when connecting the unit to a power source.
•
Reliable earth grounding of rack-mount equipment should be maintained.
Particular attention should be given to supply connection other than direct connections to the branch circuit
(e.g., use of power strips). ♦
•
Lithium Battery Safety Statement
5 Chapter 3 - Operations