Adtec Edje 4000, User Manual

Page: 7 / 51

Regulated +12 VDC inpout is required. We recommend using the power supply and power cable
supplied with your edje4000 AVC encoder. 2.5mm
Locking
AUDIO In Balanced or unbalanced stereo audio input via removable screw terminal. 5-pin RST
CVBS Analog Composite Video Input BNC
Parallel Time-To-Live control and status Tally IO. Simple Start, Stop, and Alarm status. 5-pin RST
Terminal
RS232 Serial Communications port (Adtec Part Number, TerminalKit2)
Default serial RS422 properties for all Adtec units:
Baud: 38,400
Data bits: 8
Stop bit: 1
Parity: None
Unit Name: edje (The asterisk {*} can optionally ber argued in place of the name.)
RJ48
Ethernet Fast Ethernet for IP Egress and Control RJ45
Default TCP IP Properties Fast Ethernet
Your Adtec edje4000 AVC encoder is shipped with the following default properties set:
Property Default Setting
IP Address 192.168.10.48
Sub Net Mask 255.255.255.0
Telnet UN ADTEC
Telnet PW NONE
Operating Temperatures
Operational Temperature Range:110 degrees Fahrenheit to 32 degrees Fahrenheit
Above 110 degrees, picture quality is sigfnificantly degraded and the life of the product is shortened.
♦
Below 32 degrees F., the product may not power up.
♦
•
Metric Conversion
Upper Range Limit: 43.3 degrees Celsius ♦
Lower Range Limit: 0 degrees Celsius ♦
•
Processing and End-to-End Latency
Approxmately 2 seconds. For lower latency, use 422.
Chapter 2 - Getting Started 4