– 21 –
•
Shut Down all Security System Functions (non-payment for a leased system).
•
Inhibit Local Touchpad Programming (prevents account takeover).
•
Read: Arming Status, AC Power Status, Lists of Faulted Zones, Bypassed
Zones, Zones Currently in Alarm, Zones Currently in Trouble, and RF
Sensors with Low Battery Conditions.
•
Lock out or unlock certain fields (see Programming Forms).
Notes: After the control and the PC have established valid communication, each
touchpad on the system will become inactive and will display " CC" or " MODEM
COMM .". The control, however, will still be scanning its zones and looking for
alarms. If an alarm does occur, after communication is broken off, alarms are
sounded and the proper dialer reports are sent to the central station. The
touchpads will become active after the download communication is terminated.
The detailed operation of the download functions is covered in the installation
instructions for the Windows Downloading Software .
Remote Programming Advisory Notes
•
Alarm and trouble reporting may be delayed during the time that the system
and the Downloader are linked to each other following a valid exchange of
codes, but the proper message will get through to the Central Station after
the link is broken.
•
Touchpad entries are ignored during the time interval stated above.
•
A copy of the program downloaded may be produced from the IBM PC
compatible computer, using the product's internal report generator, when an
optional printer is connected (consult your PC manual for proper printer and
connections).
•
Program Upload or Download Time —Approximately one minute fifteen
seconds for a complete program.
Summary of Contents for SA10ADTEG
Page 22: ... 22 NOTES ...
