ADT 6270ADT, Installation And Setup Gude

Page: 49 / 64

SECTION 7: Troubleshooting
7–7
LED Test
Perform the LED Test as follows:
SCREEN ACTION
1. When you press the Test button
associated with the LED Test, "Testing.."
is displayed in the test status column on
the "Diagnostics" screen while the 3 LEDs
light sequentially, top to bottom (red,
green, amber), 5 times. At the conclusion
of the test, a pop-up "Confirmation
Window" is displayed in the center of the
"Diagnostics" screen.
2. Within the Confirmation Window the
question "Did you see chasing LED
pattern?" is displayed.
If you press the
Yes button, "Passed" is
displayed in the test status column on the
"Diagnostics" screen.
If you press the
No button, "Failed" is
displayed in the test status column on the
"Diagnostics" screen.