adstec MES9000 Series, Instruction Manual

Page: 30 / 57

MES9000 series − Instruction manual v1.1 30
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
5.3.3 Devices with 24 VDC power supply
DO Digital output 24 VDC
(The figure shows the socket inside the device)
DI Digital input 24 VDC
0V Reference potential
FE Functional earth
V+ +24 VDC ± 20%
Conductor cross sections: V+ / FE / 0V: AWG 18 (
≙
0.75 mm
2
)
5.3.4 Devices with an AC voltage supply
N / L AC voltage
(The figure shows the socket inside the device)
0V Reference potential of the digital
input
DI Digital input +24 VDC ± 20 %
A supply line with conductor cross sections of 1 mm
2
is provided and can be used for the power supply.
If you assemble your own cable, we recommend the following:
− Cable end sleeves: 8 mm in length with approval corresponding to the area of application.
Examples: Panduit FSD77-8-D or Klauke 4708
−
Blade terminal for PE wires: 6.3 x 0.8 mm without junction with approval corresponding to the area
of application. Examples: JST FVDDF1.25-250A or Klauke 720
DO DI 0V FE V+
The permissible voltage tolerances and the maximum values for the power
consumption can be found in section 12
Technical data .
N L 0V DI
The permissible voltages and the maximum values for the power consumption can be
found in section 12
Technical data
.