MES9000 series
−
Instruction manual v1.1
44
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
8 Software / driver installation
8.1 Initial installation of the operating system
The devices are delivered with a pre-installed operating system depending on the client's specifications.
If the mass storage has been reformatted, the operating system can be reinstalled by using one of the
existing interfaces (alternatively via USB or PXE).
The files required for this (image, driver and firmware), along with a detailed description of the
procedure, can be obtained from ADS-TEC support on request.
8.2 Write protection
If the mass storage or parts of it have been write-protected in the
Configuration Center
, this write
protection must be removed again before changes are made to the software installation.
⇨
Unified Write
Filter
After the software installation has been changed, the write protection must be set again and the device
restarted.
8.3 Installing Hilscher netJACK modules at a later date
If these modules are installed at a later date, a driver must be installed and can be found in the following
directory:
C:\Drivers\Fieldbus\Hilscher
From there, start the
cifX Device Driver Setup
.
After successful installation, the device will appear in the device manager as
cifX Communication
Interface
.
9 Cleaning
Clean the device using some glass cleaner on a soft cloth.
