IPC9000 Serie
−
Instruction manual v1.1
9
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
2 General device information
2.1 Manufacturer and contact details
The manufacturer of the device is ads-tec Industrial IT GmbH. The company is referred to in the
following as ADS-TEC.
ads-tec Industrial IT GmbH
Heinrich-Hertz-Str.1
72622 Nürtingen
Germany
Phone: +49 7022 2522-0
Email: [email protected]
Web: www.ads-tec.de
2.2 Intended use
The IPC is intended for industrial use and in this case primarily for use in machine and plant
construction.
In accordance with its IP protection class, it may be installed in cabinets or mounted on machines/plants
indoors.
The operator alone shall be responsible for ensuring that all
operator obligations
are observed and for
complying with any technical or statutory amendments that may arise.
Installation, commissioning and operation may only be performed by
qualified and trained personnel
.
Intervention by the user is required only for performing the actions described in this document. Should
any further modifications be required, it is necessary to consult either with the manufacturer directly or
with service personnel authorised by the manufacturer.
The device must be
de-energised
during service work. Appropriate measures must be taken to prevent
electrostatic discharges
on components.
The device is
only
to be assembled, installed and operated
within the permissible specifications
.
Use in non-specified environments is prohibited.
