PAUSE
The pause key will halt
the operation of the system at any
point. It is used to pause the system
for inspection, media jams or to
pause the machine for any other
reason. Press the pause key to
resume the system. The system can
be jogged while paused and will
remember where it was and resume
from where it was stopped
regardless of where it was jogged.
This is very helpful for inspecting
the cut. You can pause the system
and joystick the media or cut head
away from its position to inspect the
cutting or registration. After
inspecting the media, simply press
the pause key again and the i-TECH
will return to the point where it was
paused and resume cutting. The
pause light will flash while the
system is paused. You can also use
the pause button to enter the unload
state (press Pause followed by
Load).
COPY
The copy key is used to
input the quantity of copies the i-
TECH will cut. It is used after the
first copy of the job is cut. Once the first copy is cut and you are happy
with the results, press the copy key. The display will read
0001.
The
number represents the total number of copies including the first one run.
Increase the number of copies by pressing the up arrow key of the joystick
or the force up button. Hold the key down and the numbers will start
moving slowing then more quickly. Press the down arrow key to lower
the number. Alternatively the force keys will increment the single digits
and the speed keys will increment the 10’s digits. If you enter 0 the copy
will stop at end of next job. If you enter -001 then it will count up
forever. Remember the number displayed includes the first copy run
before the copy key was pressed. Input the copy quantity and start the
cutting by pressing the
SELECT KEY
. On the 230/315 front panel only
one copy at a time can be made.
SPEED
The speed keys are used for controlling the cut speed (the speed
the knife travels around the periphery of the items being cut). Increase the
speed by pressing the up arrow key. Decrease the speed by pressing the
down arrow key. Hold the key down and the numbers will start moving
slowing then more quickly. The range for speed is 1 to 100%. On the 315/230 front panel rotate
the speed knob to change the speed. In the cas position the computer settings control the speed.
FORCE
The force key is used in conjunction with the test cut key to set the depth of cut. The
factory default for cutting is set by the value saved in setting #1. The range of force is 1 to 100
when the system is in the normal force range and 1 to 1000 when in the high resolution force. For
11
L P C
TC
F1
F3
SELECT
LOAD
PAUSE
COPY
S
P
E
E
D
F
O
R
C
E
TEST
CUT