VMT6010/6012/6015
16
© ads-
tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
Note:
If the software keyboard is not installed, only the functions for display
settings and volume control are active. When changing the values, no
representation is visible on the screen. The key functions can have been
previously modified in accordance with customer specific requirements. The
above described functions are pre-set ex works.
Version 2 (State from Q2/2010)
ON / OFF pushbutton of the device (ATX functionality)
The operating system is shut down, but the device is not
disconnected from the input voltage.
Depending on the actual equipment version, each device is equipped with an operating
system (Windows CE 6.0, Windows XP embedded or Windows XP Professional) ex
works, and a soft keyboard is installed. The keys on the front panel are pre-allocated
with the following functions by a specific driver in the soft keyboard:
Level 1:
Activate and deactivate the soft keyboard for letter/character input
by using the touch screen.
Level 2:
Decrease display brightness.
Level 1:
Change task (Alt+ESC) in Windows.
Level 2:
Increase display brightness.
Level 1:
Not allocated. The configuration of this level can be customised by
programming via the soft keyboard programme
Level 2:
Decrease the volume of the internal speakers.
Level 1:
Right mouse-key function.
Level 2:
Increase the volume of the internal speakers
Shift key (SHIFT) for activating the second keyboard level. This
key must be pressed simultaneously with the desired function
key..
