High Speed Door Servo Control System
7
4. Safety
1) The motor and controller MUST ground properly;
2) During the installation, commission and operation NO ONE is permit to stand
under the door and stand in the operating path;
3) While installing and testing the motor package, at least half of the door’s axle
MUST be insert into the reducer.
4) Check if there any obstacles in the operating path, if there is please remove the
obstacles before lower the gate.
5) DO NOT disassemble the controller and motor; any damagers due to this
action are NOT cover under free warranty.
The company reserves the right to modify the product, according to improvement
of technology and production process, while the basic characteristic of the
product may remain some.
Maintenance
The mounting screw for the controller and motor must inspect regularly to prevent
screw been getting loose and falling off. Check the internal and external wirings.
Check and change the oil for the reducer on regular basis.
