High Speed Door Servo Control System
6
Operating Instructions
1. Basic Function
The system can operated via: 1) control box; 2)
jog control; 3)
continuous
automatic
operation
;
4)
emergency stop
;
5) single side operation box; 6) time
delay; 7)
radar and/or induction loops. Please refer to wiring terminal for external
connections.
2. Control Key/Button
a) “ ↑ ” Key/Button: Inching control door’s opening movement or continuous
automatic opening.
b) “ ↓ ” Key/Button: Inching control door’s closing movement or continuous
automatic closing.
NOTE: these setting are set according to the contact; however they can be
changed according to operating needs.
c) “STOP” Key/Button: Push this key under emergency situation it will shutdown
the operation and the door will stop and stay at that position
d）Four key on LCD are main menu key.
3. Install limit switch
The limit switch of PE200 and PE500 uses the built-in absolute encoder solution,
which is pre-installed in the motor before leaving the factory and does not need to
be reinstalled.
