- 17 -
Step 2:
On the Welcome screen please follow the Instructions to start the NAS Drive Kit, click
Next to continue.
- Connect the power adapter to an outlet and Press the Power Button on the Front Panel to
Power up the NAS Drive Kit.
- Ensure that the Power LED is Green.
Note. To Power Off your NAS Drive Kit, press the Power Button for
2 (two) seconds
until Power LED
starts blinking, wait for the unit to go off.
- Connect the NAS Drive Kit to the Hub/Router by using the LAN Cable provided.
- Once the LAN cable is plugged, check to make sure that the LAN LED in the NAS Drive Kit
is ON.