- 58 -
other related system configuration in which the product interfaces.
Proof of purchase will be required before any warranty consideration by ADS occurs.
This warranty does not cover any damage caused by negligence, non-authorized modifications,
or parts installed without prior written permission from ADS.
This warranty does not apply if the product has been damaged by accident, abuse, or
misapplication, or as a result of service to the product by anyone other than ADS.
If your ADS product is not in working order, your only recourse is repair or warranty replacement,
as described above. UNDER NO CIRCUMSTANCES will ADS Technologies, Inc. be liable for
consequential damages, including but not limited to any lost savings, lost profits, or any other
damages, caused by the use of any ADS Technologies, Inc. product or inability to use the product,
even if the dealer or ADS Technologies, Inc. has been advised of such liability or other claims.
This includes damage to property and, to the extent permitted by law, damages for personal injury.
This warranty is in lieu of all other warranties including implied warranties of merchantability and
fitness for a particular purpose.
FCC Information:
Federal communications Commission Radio Frequency Interference Statement Note: This equipment has been
tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instruction manual may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio TV technician for help.
Notice:
(1) The changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
(2) Shielded interface cables and AC power cord, if any, must be used in order comply with the emission limits.
CE Information:
This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 class B for ITE,
the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
Company has an on-going policy of upgrading its products and it may be possible that information in this document
is not up-to-date. Please check with your local distributors for the latest information. No part of this document can be
copied or reproduced in any form without written consent from the company.
