background image

There are two things you must do to ensure trouble free service in the event you need warranty repairs.

1 - Keep your original sales receipt in a safe place. A copy of the receipt will be required to obtain

warranty service.

2 - Be sure your retail dealer has written the date, the model number, and the serial number of the

Product on the receipt.

To give yourself an extra measure of protection, make a separate record of the information about your
purchase and keep it in a safe place. In the event you misplace the sales receipt, your dealer may be
able to give you a copy.
Take a moment now to read the terms of your warranty. Check to be sure your sales receipt is dated
and has the Product model number on it. Then put it away in a safe place.

When shipping a Product in for service:

• Enclose a copy of your original sales receipt that has the date, the Product model number and serial

number (if applicable) written on it.

• Always ship Products in the complete original packing material.
• Avoid shipping Products via the Postal service. If you must use the Postal service, be sure to register

and insure the package.

a/d/s/ Limited Warranty

Analog and Digital Systems, Inc. (a/d/s/) warrants to the original consumer purchaser of the a/d/s/
Products described in this manual, that the Product will be free from defects in materials and
workmanship for a period of one (1) year after the date of purchase. If the Product is installed by an
authorized a/d/s/ retail dealer, the warranty is extended to (3) three years, a/d/s/’ sole obligation under
this warranty shall be to provide, without charge, parts and labor necessary to remedy the defects, if
any, that appear during the warranty period.
This warranty is the sole and exclusive express warranty given with respect to the Product. All other
express warranties are hereby excluded. Neither a/d/s/ nor the authorized dealer who sells the Product is
responsible for indirect, incidental, or consequential damages. Some states do not allow the exclusion
or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply
to you. This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.

IMPORTANT - Keep your original sales receipt. Be sure the retail dealer has written on it the date, model
number, and serial number (if applicable) of the Product. This information is required for warranty
service.

This warranty is limited to:

• Products purchased from authorized a/d/s/ retail dealers in the United States. a/d/s/ will supply a list of

authorized dealers on request. In order to obtain warranty service you must:

• Return the Product, freight prepaid, to the a/d/s/ dealer from which it was purchased, an authorized

a/d/s/ independent service agency, or to a/d/s/. If necessary you may call a/d/s/ Customer Service for
the names and addresses of authorized independent service agencies in your area.

• Provide proof of purchase in the form of a copy of your original sales receipt. The date, model

number, and serial number (if applicable) of the Product must be written on the sales receipt.

This warranty does not cover:

• Damage that is a result of misuse, abuse, accident (including but not limited to damage by water),

faulty hookup, defective or maladjusted associated equipment, or the use of the Product with
equipment for which it was not intended.

• Cosmetic defects that appear more than thirty (30) days after the date of purchase. Cosmetic damage

caused by improper handling is also excluded.

• Products that are used for commercial purposes.
• The cost of removing or reinstalling the Product. 
• Damage that occurs while the Product is being shipped to whoever will service it. See the information

above regarding shipping procedures.

This warranty is void if:

• The product identification or serial number label is removed or defaced in any way.
• The Product is serviced or repaired by any one other than a/d/s/ or an authorized a/d/s/ dealer or

service agency.

analog and digital systems,inc
300 wildwood ave.
woburn, massachusetts 01801 USA
p 781.729.1140
f 781.729.3535

warranty

information

Summary of Contents for 336px

















Reviews: