There are two sets of input terminals on each 336PX crossover. One set is the high-frequency
input and output, with the other side the low-frequency input and output. Connect the wires
from the woofer to the low frequency output terminals and the tweeter wires to the high
frequency output terminals. The two sets of input terminals make it easy to bi-amplify or bi-
wire the system. When the system is bi-amplified two amplifier channels are used to drive each
336PX. One pair of channels drives the tweeters, the other pair drives the woofers. If a single
amplifier channel is used for each speaker system, the 336PX should be bi-wired by attaching
a separate speaker wire to the high frequency and low frequency inputs of the crossover and
connecting the wires in parallel at the amplifier as shown in fig.3. Please note that the
amplifier load with this connection is 4-Ohms.
6
making the
connection
bi-wiring
fig.3.
