HDT8012
23
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
6 Commissioning
6.1 Scope of delivery
Please check that all of the following components are contained in the packaging:
•
1 x device
•
1 x 4-pin plug for power supply (preplugged)
Optional scope of delivery:
•
Installation kit for brackets
•
Power adapter with power cable and 4-pin plug for power supply
•
ADS-TEC cable kit
6.2 Check for operational readiness
Check the device to determine whether hidden damages have been caused by improper transport,
incorrect operation / storage conditions or improper handling.
If you find any damage, contact the manufacturer immediately. In this case the device must
not
be put
into operation.
ATTENTION
Hazard due to condensation
Damage to electronic components caused by condensation resulting
from temperature fluctuations.
The device should only be switched on after it has acclimated to
the ambient temperature!
To avoid overheating in operation: The device must not be
exposed to direct radiation by sunlight or any other heat source.
ATTENTION
Damages through electrostatic charging
Electrostatically sensitive charging can damage components.
All installation and service work performed on the device must be
performed only under safe, secure and de-energised conditions.
Recommendation for use:
The shielding of a data cable must always be connected with the connector
housing (EMC).
