BEFORE YOU BEGIN
Take inventory
What you should find in your standard ODOM kit.
Page 4
A Hull
B Deck
C Mast
D Boom Tube
E
Keel Fin, (2) Nuts and Washers
F
Keel Bulb
G Rudder
H Rudder Post
A
B
J
K
M
Q
N
O
R
P
L
C
D
S
U
V
T
W
X
E
F
G
H
I
I
Rudder Post Flange
J
Fairlead Doubler (2)
K Keelson Block Top Plate
L
Keelson Upper & Lower Block
M Keel Bolt Tube
N Forward Bulkhead
O Aft Bulkhead
P Aft Bulkhead Brace
Q Sail Servo Support (2)
R Rudder Servo Support (2)
S
Main Hatch Slide
T
Main Hatch Cover
U Lazerette Hatch Covers (2)
V Sail Logo
W Shield with Ring
X 1/8” Carbon Fiber Tube
OPTIONAL BOAT STAND KIT
DELUXE BOAT STAND KIT with HOLD-DOWN CORD
• (4) Interlocking Wood Legs
• (2) Wood Side Supports
• (2) Straps, 1" Wide Webbing, 16" long each
• (4) #6 x 3/4" Brass Flat Head Screw
• (4) #6 Wrass Finish Washer
• (2) Male/Female Bolts
• (1) Shock Cord with Slide Locks
Deluxe Boat Stand will remain fully open while
allowing straps to remain slack to cradle the boat.
Also the straps remain straight since the legs are
not offset. The Shock Cord holds the boat securely
in the stand and prevents the boat from
sliding fore and aft while transporting.
Figure 2
© 2010 by Adrian Olson. All rights reserved.
