•
This UPS has been designed and constructed to protect your assets from the wide
range of power aberrations experienced on Utility power lines today. It is your
insurance for reliable, clean and stable voltage supply. It is important to install the
system correctly and to have it maintained correctly by your local distributor.
Chapter 1. IMPORTANT SAFETY
INSTRUCTIONS
•
WARNING:
This is a Class A-UPS Product and may cause radio interference to other home
appliances. User are advised to take additional measures and check with their local
distributor if in doubt.
SAVE THESE INSTRUCTIONS
•
This manual contains important instructions that should be followed during
installation and maintenance of the UPS and batteries.
•
Servicing of Batteries Should be Performed or Supervised by Trained Personnel with
Knowledge of Batteries and the Required Precautions
•
When Replacing Batteries, Replace With the Same Quantity, Type & Capacity.
An Important Notice
•
CAUTION – Do Not Dispose of Battery or Batteries in an open fire. The Battery May
Explode.
•
To ensure safety in all applications where a UPS is hard wired to the Electrical Supply,
ensure that the system is installed by a Qualified Electrical Contractor.
•
CAUTION – Do not open or mutilate the batteries. The electrolyte from the batteries is
toxic and harmful to the skin and eyes.
•
The UPS systems which are supplied with a factory input plug can be safely connected
to the wall receptacle by the user.
•
CAUTION – Risk of Electric Shock – Battery Circuit is not isolated from AC, hazardous
Voltage may exist between battery terminals and ground. Test before touching with
bare hands.
•
This UPS is connected to an internal/external battery bank. There will be voltage at the
output terminals if the UPS is turned on even if the input AC Mains is not available.
•
CAUTION – A Battery can present a Risk of Electrical Shock and High Short Circuit
Current. The Following Precaution Should be Observed When Working on Batteries:
•
Make sure that the AC Utility outlet is correctly grounded.
•
Do not try to repair the unit yourself, contact your local supplier or your warranty will be
void.
A. Remove watches, rings, or other metal objects.
B. Use tools with insulated handles.
•
Please make sure that the input voltage of the UPS matches the supply voltage.
C. Wear rubber gloves and boots.
D. Do not lay tools or metal parts on top of batteries.
•
Use a certified input power cable with the correct plugs and sockets for the appropriate
voltage system.
E. Disconnect charging source prior to connecting or disconnecting battery terminals.
•
CAUTION – To reduce the risk of fire, connect only to a circuit provided with 50
amperes maximum branch circuit over-current protection in accordance with
the National Electric Code, ANSI/NFPA 70.( 3KRT)
•
To eliminate any overheating of the UPS, keep all ventilation openings free from
obstruction and do not place any foreign objects on top of the UPS. Keep the UPS
20 cm away from the wall.
•
Make sure the UPS is installed within the proper environment as specified. (0-40
°
C and
30-90% non-condensing humidity)
•
Do not install the UPS under direct sunlight. Your warranty will be void if the batteries
fail due to overheating.
•
This UPS system is designed for indoor use only.
•
This UPS system is not design for use in dusty, corrosive and salty environments .
•
The warranty for this UPS will be void if water or other liquid is spilt or poured directly
onto the UPS. Similarly we do not warrant any damage to the UPS if foreign objects are
deliberately or accidentally inserted into the UPS enclosure.
•
The battery will discharge naturally if the system is unused for a period of time.
•
It should be recharged every 2-3 months if unused. If this is not done, then the
warranty will be null and void. During normal operation, the batteries will be
automatically remained in charged condition.
•
This UPS supports electronic equipment in offices, telecommunication, process control,
medical and security applications.
2
3
